Jan-2022 MikroTik MTCNA Certification Real 2022 Mock Exam
MTCNA Exam Questions and Valid PMP Dumps PDF
MikroTik Certified Network Associate (MTCNA) Exam Certification Path
MTCNA is the first Level Certification that provides access to any MTCRE, MTCWE, MTCTCE, MTCUME, MTCSE, MTCSWE, MTCEWE, or MTCIPv6E second-level certification. MTCRE is required for MTCINE certification to be achieved. Hence the certification path is simple as MTCNA is the basic level certification. As a prerequisite of the exam, the students should have a strong knowledge of TCP/IP and subnet.
NEW QUESTION 55
In MikroTik RouterOS, Layer3 communication between 2 hosts can be achieved by using an address subnet of:
- A. /29
- B. /32
- C. /31
- D. /30
Answer: A,B,D
NEW QUESTION 56
How many layers does Open Systems Interconnection model have?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: D
NEW QUESTION 57
What is the meaning of letter "R" on an active session in the menu PPP Active Connections?
- A. Remote
- B. Running
- C. Radius
Answer: C
NEW QUESTION 58
Which type of encryption could be used to establish a connection with a simple passkey without using a
802.1X authentication server?
- A. WPA EAP/WPA2 EAP
- B. WPA PSK/WPA2 PSK
Answer: A
NEW QUESTION 59
Is it possible to limit how many clients are able to connect to an access point?
- A. Yes, but only with access-lists
- B. No it's not possible at all
- C. Yes
Answer: A
NEW QUESTION 60
A network ready device is directly connected to a MikroTik RouterBOARD 750 with a correct U.T.P. RJ45 functioning cable. The device is configured with an IPv4 address of 192.168.100.70 using a subnet mask of
255.255.255.252. What will be a valid IPv4 address for the RouterBOARD 750 for a successful connection to the device?
- A. 192.168.100.71/255.255.255.252
- B. 192.168.100.68/255.255.255.252
- C. 192.168.100.69/255.255.255.252
- D. 192.168.100.70/255.255.255.252
Answer: C
NEW QUESTION 61
If your router is facilitating a CSU/DSU, which of the following commands do you need to use to provide the router with a 64000bps serial link?
- A. RouterA(config)#bandwidth 64
- B. RouterA(config-if)#clock rate 64
- C. RouterA(config-if)#bandwidth 64000
- D. RouterA(config-if)#clock rate 64000
Answer: D
NEW QUESTION 62
For user in local PPP Secrets/PPP Profiles database, it is possible to
- A. Set max values for transferred data (Rx/Tx)
- B. Allow/deny use of more than one login by this user
- C. Allow only PPPoE login
- D. Deny services (like telnet) only for this user or for one group of users
- E. Allow login by PPPoE and PPTP, but deny login by L2TP
Answer: A,B,C
NEW QUESTION 63
You want to transfer existing '/ip firewall filter' configuration from one router to a new system.
Choose the best possible way to do:
- A. Export global configuration and remove everything apart from '/ip firewall filter'
- B. Create backup, edit backup file and restore on target router
- C. Export only '/ip firewall filter'
- D. Create backup only of '/ip firewall filter' rules
Answer: C
NEW QUESTION 64
You can not use OSPF and RIP routing protocols simultaneously on the RouterOS.
- A. FALSE
- B. TRUE
Answer: A
NEW QUESTION 65
Consider the following network diagram. In R1, you have the following configuration:
/ip route
add dst-address=192.168.1.0/24 gateway=192.168.99.2
/ip firewall nat
add chain=srcnat out-interface=Ether1 action=masquerade
On R2, if you wish to prevent all access to a server located at 192.168.1.10 from LAN1 devices, which of the following rules would be needed?
- A. /ip firewall filter add chain=input srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop
- B. /ip firewall nat add chain=dstnat srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop
- C. /ip firewall filter add chain=forward srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop
- D. /ip firewall filter add chain=forward srcaddress=192.168.0.0/24 dst-address=192.168.1.10 action=drop
Answer: A
NEW QUESTION 66
Which wireless mode allows you to connect to any standard AP (not only MikroTik) and to be able to bridge this wireless interface to an Ethernet?
- A. station-pseudobridge
- B. bridge
- C. station
- D. station-wds
Answer: C
NEW QUESTION 67
What is term for the hardware coded address found on an interface?
- A. Interface Address
- B. FQDN Address
- C. IP Address
- D. MAC Address
Answer: D
NEW QUESTION 68
PPP Secrets are used for
- A. Router users
- B. PPPoE clients
- C. L2TP clients
- D. IPSec clients
- E. PPP clients
- F. PPtP clients
Answer: B,C,F
NEW QUESTION 69
Mark all the features that can be used for limiting client registrations to your access point:
- A. wpa
- B. WDS
- C. registration-table
- D. access-list
Answer: D
NEW QUESTION 70
......
MTCNA Question Bank: Free PDF Download Recently Updated Questions: https://authenticdumps.pdfvce.com/MikroTik/MTCNA-exam-pdf-dumps.html